1 / 2
Goldring Eroica HX High-Output Moving Coil Cartridge
درهم 2,500
تفاصيل السلعة
العمر
1 - 6 شهر
ضمان
لا ينطبق
الحالة
ممتازة من الداخل والخارج
مدى الإستخدام
تم الاستخدام مرات قليلة
تم النشر بتاريخ: 7 أبريل 2026
الوصف
The Goldring Eroica HX is a high-output moving coil phono cartridge designed as a straightforward performance upgrade for vinyl systems. It combines many of the sonic benefits of a traditional moving coil design with output levels high enough to work with standard moving magnet phono inputs — meaning you can enjoy enhanced dynamics, improved stereo imaging, and controlled high frequencies without needing a dedicated MC phono stage.
Features
High-output moving coil design – Delivers MC performance while remaining compatible with moving magnet inputs.
Pure-iron cross-armature structure – Reduces effective mass and crosstalk for cleaner stereo separation.
Ultra-fine enamelled copper windings – For higher output and correct impedance matching.
Gyger II diamond stylus – Precision tracing with low distortion up to high frequencies.
Light but rigid Pocan® housing – Reduces coloration and protects the delicate mechanism.
Easy installation – Standard fitment for most tonearms with no additional adjustments needed.
Wide tonearm compatibility – Works with straight, S-shaped, or J-shaped arms of various materials.
Specifications
Frequency Response: 20 Hz – 20 kHz ± 3 dB
Frequency Range: 10 Hz – 50 kHz
Channel Balance: ≤ 1 dB @ 1 kHz
Channel Separation: ≥ 25 dB @ 1 kHz
Sensitivity: 2.5 mV ± 1 dB @ 5 cm/sec
Static Compliance: 25 mm/N
Trackability: 85 µm @ 315 Hz
Equivalent Tip Mass: 0.4 mg
Vertical Tracking Angle: 22°
Stylus Type: Gyger II diamond (non-replaceable, re-tip service available)
Load Resistance: 47 kΩ
Load Capacitance: 100 – 500 pF
Internal Resistance: 35 Ω
Mass (body): 5.2 g
Mass (inc. fixings): 6.6 g
Fixing Centre: 12.7 mm (0.5 inch)
Recommended Playing Weight: 1.5 – 2.0 g (nominal 1.75 g)
Features
High-output moving coil design – Delivers MC performance while remaining compatible with moving magnet inputs.
Pure-iron cross-armature structure – Reduces effective mass and crosstalk for cleaner stereo separation.
Ultra-fine enamelled copper windings – For higher output and correct impedance matching.
Gyger II diamond stylus – Precision tracing with low distortion up to high frequencies.
Light but rigid Pocan® housing – Reduces coloration and protects the delicate mechanism.
Easy installation – Standard fitment for most tonearms with no additional adjustments needed.
Wide tonearm compatibility – Works with straight, S-shaped, or J-shaped arms of various materials.
Specifications
Frequency Response: 20 Hz – 20 kHz ± 3 dB
Frequency Range: 10 Hz – 50 kHz
Channel Balance: ≤ 1 dB @ 1 kHz
Channel Separation: ≥ 25 dB @ 1 kHz
Sensitivity: 2.5 mV ± 1 dB @ 5 cm/sec
Static Compliance: 25 mm/N
Trackability: 85 µm @ 315 Hz
Equivalent Tip Mass: 0.4 mg
Vertical Tracking Angle: 22°
Stylus Type: Gyger II diamond (non-replaceable, re-tip service available)
Load Resistance: 47 kΩ
Load Capacitance: 100 – 500 pF
Internal Resistance: 35 Ω
Mass (body): 5.2 g
Mass (inc. fixings): 6.6 g
Fixing Centre: 12.7 mm (0.5 inch)
Recommended Playing Weight: 1.5 – 2.0 g (nominal 1.75 g)
منطقة
أرابيلا تاون هاوس 1, أرابيلا تاون هاوس, مدن, دبي, الإمارات
- المحاسبة / المالية
- السيارات
- الصحة والجمال
- التنظيف /التدبير المنزلي
- الإنشاءات
- شيف / طباخ
- خدمة العملاء / مركز الإتصال
- إدارة وتحليل البيانات
- التصميم
- سائق / توصيل
- تعليم
- هندسة
- إدارة الفعاليات والمناسبات
- عامل / فنّي
- الموارد البشرية - الإدارة
- تكنولوجيا المعلومات
- خدمات قانونية
- خدمات لوجستية و توزيع
- التصنيع / التخزين
- كابتن بحري / بحار
- التسويق/الإعلان
- الاعلام,الفنون والترفيه
- الطب / الرعاية الصحية
- عقارات
- تشغيل المطاعم
- المبيعات / تطوير الأعمال
- السكرتارية / المكتب الأمامي
- الأمن /الحماية
- رياضة و لياقة
- السفروالضيافة
- أخرى
- يبحث عن عمل
English