1 / 5
Legendary Bryston B100SST amplifier
درهم 8,500
تفاصيل السلعة
العمر
5 - 10 سنوات
الحالة
بدون مشاكل أو عيوب ملحوظة
ضمان
لا
مدى الإستخدام
تم الاستخدام مرات قليلة
تم النشر بتاريخ: 13 أكتوبر 2026
الوصف
The Bryston B100 SST is a highly regarded, dual-mono solid-state integrated amplifier available with a classic black or silver anodized aluminum front panel. Celebrated for its transparent, dynamic, and exceptionally clean presentation, it combines a fully discrete analog preamplifier section with a power stage derived from Bryston’s acclaimed 2B-SST architecture. [1]
⚡ Key Specifications & Performance
• Power Output: Delivers 100 Watts per channel into 8 ohms, which dynamically increases to 180W–200W per channel into 4 ohms. Factory bench tests frequently document actual outputs reaching up to 137W into 8 ohms.
• Damping Factor: Features an exceptionally high damping factor of 500 at 8 ohms, ensuring tight, precise control over demanding speaker drivers (such as the Sonus faber floorstanders you are evaluating).
• Total Harmonic Distortion (THD): Exceptionally low at 0.005%, yielding an ultra-black background and zero audible coloration.
• Architecture: Uses a true dual-mono internal layout featuring three independent, custom ultra-low-noise toroidal power transformers to completely isolate the left and right channels, alongside separate digital and analog ground paths.
🔌 Connectivity & Modular Options
• Core I/O: Equipped with 7 high-level unbalanced RCA inputs, a fully active traditional tape loop (tape monitor function), a front-panel headphone jack, and heavy-duty, 5-way gold-plated binding posts.
• Pre-Out / Main-In Loops: The preamplifier and power amplifier sections can be completely separated via rear jumpers. This allows you to use the B100 SST strictly as a standalone preamplifier or as a dedicated 100Wpc stereo power amplifier.
• Factory Options: Depending on the specific configuration of the unit, it may include a built-in Crystal CS43122 24-bit/96kHz upsampling DAC board (adding 2 S/PDIF coax and 2 TosLink digital inputs) and/or a premium Moving Magnet (MM) phono stage. Note: On base analog models without the internal DAC, the rear optical/coaxial chassis cutouts are present but remain inactive.
📉 Used Market Value & Reliability
• Build Weighing a robust 30 lbs (13 kg), the B100 SST ]
• Market Pricing: In the secondary market, clean black-faceplate units generally command between $1,500 USD (approx. AED 5,500) to AED 10,000 (€1,600 – €2,500+) depending globally on their operational condition, the inclusion of the optional $400 matching machined aluminum remote control
⚡ Key Specifications & Performance
• Power Output: Delivers 100 Watts per channel into 8 ohms, which dynamically increases to 180W–200W per channel into 4 ohms. Factory bench tests frequently document actual outputs reaching up to 137W into 8 ohms.
• Damping Factor: Features an exceptionally high damping factor of 500 at 8 ohms, ensuring tight, precise control over demanding speaker drivers (such as the Sonus faber floorstanders you are evaluating).
• Total Harmonic Distortion (THD): Exceptionally low at 0.005%, yielding an ultra-black background and zero audible coloration.
• Architecture: Uses a true dual-mono internal layout featuring three independent, custom ultra-low-noise toroidal power transformers to completely isolate the left and right channels, alongside separate digital and analog ground paths.
🔌 Connectivity & Modular Options
• Core I/O: Equipped with 7 high-level unbalanced RCA inputs, a fully active traditional tape loop (tape monitor function), a front-panel headphone jack, and heavy-duty, 5-way gold-plated binding posts.
• Pre-Out / Main-In Loops: The preamplifier and power amplifier sections can be completely separated via rear jumpers. This allows you to use the B100 SST strictly as a standalone preamplifier or as a dedicated 100Wpc stereo power amplifier.
• Factory Options: Depending on the specific configuration of the unit, it may include a built-in Crystal CS43122 24-bit/96kHz upsampling DAC board (adding 2 S/PDIF coax and 2 TosLink digital inputs) and/or a premium Moving Magnet (MM) phono stage. Note: On base analog models without the internal DAC, the rear optical/coaxial chassis cutouts are present but remain inactive.
📉 Used Market Value & Reliability
• Build Weighing a robust 30 lbs (13 kg), the B100 SST ]
• Market Pricing: In the secondary market, clean black-faceplate units generally command between $1,500 USD (approx. AED 5,500) to AED 10,000 (€1,600 – €2,500+) depending globally on their operational condition, the inclusion of the optional $400 matching machined aluminum remote control
منطقة
الخليج التجاري, دبي, الإمارات
- المحاسبة / المالية
- السيارات
- الصحة والجمال
- التنظيف /التدبير المنزلي
- الإنشاءات
- شيف / طباخ
- خدمة العملاء / مركز الإتصال
- إدارة وتحليل البيانات
- التصميم
- سائق / توصيل
- تعليم
- هندسة
- إدارة الفعاليات والمناسبات
- عامل / فنّي
- الموارد البشرية - الإدارة
- تكنولوجيا المعلومات
- خدمات قانونية
- خدمات لوجستية و توزيع
- التصنيع / التخزين
- كابتن بحري / بحار
- التسويق/الإعلان
- الاعلام,الفنون والترفيه
- الطب / الرعاية الصحية
- عقارات
- تشغيل المطاعم
- المبيعات / تطوير الأعمال
- السكرتارية / المكتب الأمامي
- الأمن /الحماية
- رياضة و لياقة
- السفروالضيافة
- أخرى
- يبحث عن عمل
English